Sonnenkraft 400 Wp HC Alpin TERRACOTTA PV FRAME MODULE double glass 2x2mm terracotta frame (1748 mm x 1143 mm x 40 mm)

Austrian premium manufacturer Sonnenkraft

400 Wp HC ALPIN terracotta (2 x 2 mm) with 108 half-cell design: red frame and red encapsulation film specially for listed buildings

• Highest design standards
• Suitable for buildings with high architectural requirements
• Stable frame concept
• 40mm Aluminium frame with mitre cut for maximum technical safety and flexibility
• Colour shade: RAL 3009 - oxide red
• Low reflection
• Suitable for applications with stringent glare requirements
• Perfectly integrated!
• The module for all listed buildings

EXTREME! The most stable module for the toughest conditions.
The POWER-ALPIN-MODULE series from SONNENKRAFT is ideal for regions with high snow loads. The modules are supplied with an extremely stable, terracotta-coloured Aluminium frame and 4 mm solar glass. The POWER-ALPIN module is particularly distinguished by its robust frame. To reinforce the frame depending on the mounting situation and withstand maximum loads of up to 8000 Pa, two optional back rails are fitted to the rear of the module. The module has been tested for downhill sliding forces in an inhomogeneous SPF test and meets the highest quality and safety requirements. This is due in particular to the extended support surface of the laminate, the material Thickness of the frame and the structural geometry.
Withstands snow loads of up to 8,000 Pa!
Thanks to a stable frame concept and 4 mm thick front glass, the Power Alpin solar module is ideal for increased loads. The module can be additionally reinforced with 2 back rails. Modules reinforced with back rails can be mounted on the façade or as free-standing individual modules.

Supplied with original Stäubli MC4 EVO2 connectors. The solar glass used is factory-fitted with an anti-reflective coating. This is complemented by a 12-year product warranty and a 25-year linear performance warranty from Austria.