Mounting System Set for VSG Glass

Glass clamping profile for VSG glass

The offer includes all parts required for mounting VSG glass, except cover rail, screws + sealing tape.

These must be purchased separately:

Cover rails:
https://pvdach.com/Abdeckschiene-fuer-Montagesystem-Klippsystem-anthrazit-feste-Laengen
(only available in fixed lengths!)

Wood screws:
https://pvdach.com/Schraube-fuer-Holz-Unterkonstruktionen-100-Stck

Metal screws:
https://pvdach.com/Schraube-fuer-Metall-Unterkonstruktionen-100-Stck

Sealing tape:
https://pvdach.com/Abdichtband-5m-extreme-Haftung-20-Jahre

The exact scope of the mounting system is calculated according to the layout of the modules and the VSG glass . Please specify your planned layout in the comments field when placing the order:

Example: 3 modules in the direction of water flow and 4 modules next to each other results in:

- 5 x clamping profiles (we calculate the total length from the length of the modules + 0.5cm joint each) incl. support rubber and insertion rubbers

- 2 x 4m T-rubber (or the actual width of the number of modules + 18mm gap between each module with our mounting system)

- 2 x Dachdicht (or required quantity)

- required number of filler strips for the edges

- 5 x end angles

-> if required: flat rubber for support on an eave, please specify when ordering if desired

Note!

Please order one mounting system set for each module or VSG glass and let us know the layout of your modules, e.g. 15 modules = 3 modules in the direction of water flow and 5 modules next to each other, then the mounting system will be configured to suit your requirements.

The glass clamping profile can also be ordered to the exact centimetre:

https://pvdach.com/Montagesystem-Meterware - please also order the cover rails if required.