Mounting system set for double-glazed modules

Mounting system set for double-glazed modules

39,00 €

incl. 0% VAT, plus

Choose tax zone / country of delivery

Glass clamping profile for double-glazed modules

complete for module length up to 2105 mm

The offer includes all parts required to install one module, except cover rail, screws + sealing tape.

These must be purchased separately:

Cover rails:
https://pvdach.com/Abdeckschiene-fuer-Montagesystem-Klippsystem-anthrazit-feste-Laengen
(only available in fixed lengths!)

Wood screws:
https://pvdach.com/Schraube-fuer-Holz-Unterkonstruktionen-100-Stck

Metal screws:
https://pvdach.com/Schraube-fuer-Metall-Unterkonstruktionen-100-Stck

Sealing tape:
https://pvdach.com/Abdichtband-5m-extreme-Haftung-20-Jahre

The exact scope of the mounting system is calculated according to the layout of the modules. Please specify your planned layout in the comments field when ordering:

Example: 3 modules in the direction of water flow and 4 modules side by side results in:

- 5 x clamping profiles (we calculate the total length from the length of the modules + a joint of 0.5cm each) incl. support rubber and pull-in rubbers

- 2 x 4m T-rubber (or the actual width of the number of modules + 18mm gap between the modules with our mounting system)

- 2 x Dachdicht (or required quantity)

- required number of filler strips for the edges

- 5 x end brackets

-> if required: flat rubber for support on an eave, please specify when ordering if desired

Note!

Please order one mounting system set for each module and tell us the layout of your modules, e.g. 15 modules = 3 modules in the direction of water flow and 5 modules side by side, then the mounting system will be configured to your requirements.

Please provide the exact dimensions of your modules and the planned layout via the information field during the ordering process so that we can adapt the system to your requirements.

The glass clamping profile can also be ordered to the exact centimetre:

https://pvdach.com/Montagesystem-Meterware - please also order the cover rails if required.

Available immediately

Delivery time: 10 Workdays

Description
Others (1)

The mounting system is suitable for glass Thicknesses up to 12 mm.

Mounting system for the perfect, rainproof installation of your double-glazed modules.

There is an 18 mm gap between the modules. The dimension from rafter centre to rafter centre is determined by the module size + 18 mm.

Example: Module Glas72 width: 995mm + 18 mm gap results in 1013 mm from rafter centre to rafter centre. The rafter thickness is irrelevant for this.

The set consists of:

- Glass clamping profile with support rubber and pull-in rubbers

- T-rubber sealing profile for unobstructed water drainage at the narrow side of the module

- DachDicht sealing compound

- End brackets

- Filler strip for the edges (segmented into lengths of 1m each)

- Flat rubber

The set does not include screws or pre-drilled holes!

Link to the screws:

Screws for wooden substructures

Screws for metal substructures

Please provide your installation plan in the comments during the ordering process, e.g. 8 modules - 2 in the direction of water flow and 4 side by side. We calculate the exact scope of delivery.

The mounting system is suitable for glass Thicknesses up to 12 mm.

Larger glass Thicknesses are possible, however, rainproof installation can then no longer be guaranteed. In addition, in this case the length of the screws used to secure the mounting system must be adjusted accordingly.

Naturally, you will receive detailed and comprehensive work instructions with pictures for the rainproof installation of your modules. Here is the link to the installation video:

https://www.youtube.com/watch?v=8C9oaH04XJs&t=5s

Installation instructions PDF

!ATTENTION!:

Shipping the rails in one piece (without segmentation) is possible at an additional charge.

Please simply specify the desired segmentation when ordering:

up to 2.2 m --> shipping via UPS €80 (Austria: €107.10)

over 2.2 m up to 6 m --> by freight forwarder €229 (Austria: only possible up to 4m: €332.01)

The shipping costs will be adjusted accordingly after the order has been placed.

If shipping takes place in combination with modules, the additional costs are waived.

This text was translated and optimised with AI.