Sonnenkraft Glas40 205 Wp Glass PV Module bifacial 40% Transparency (1700 mm x 995 mm x 7 mm)+

Glass clamping profile for double-glazed modules

• complete for module length up to 2105 mm

The offer includes all parts required to install one module, except cover rail, screws + sealing tape.

These must be purchased separately:

Cover rails:
https://pvdach.com/Abdeckschiene-fuer-Montagesystem-Klippsystem-anthrazit-feste-Laengen
(only available in fixed lengths!)

Wood screws:
https://pvdach.com/Schraube-fuer-Holz-Unterkonstruktionen-100-Stck

Metal screws:
https://pvdach.com/Schraube-fuer-Metall-Unterkonstruktionen-100-Stck

Sealing tape:
https://pvdach.com/Abdichtband-5m-extreme-Haftung-20-Jahre

The exact scope of the mounting system is calculated according to the layout of the modules. Please specify your planned layout in the comments field when ordering:

Example: 3 modules in the direction of water flow and 4 modules side by side results in:

- 5 x clamping profiles (we calculate the total length from the length of the modules + a joint of 0.5cm each) incl. support rubber and pull-in rubbers

- 2 x 4m T-rubber (or the actual width of the number of modules + 18mm gap between the modules with our mounting system)

- 2 x Dachdicht (or required quantity)

- required number of filler strips for the edges

- 5 x end brackets

-> if required: flat rubber for support on an eave, please specify when ordering if desired

Note!

Please order one mounting system set for each module and tell us the layout of your modules, e.g. 15 modules = 3 modules in the direction of water flow and 5 modules side by side, then the mounting system will be configured to your requirements.

Please provide the exact dimensions of your modules and the planned layout via the information field during the ordering process so that we can adapt the system to your requirements.

The glass clamping profile can also be ordered to the exact centimetre:

https://pvdach.com/Montagesystem-Meterware - please also order the cover rails if required.