GridParity B45/6 275 Wp Glass PV Module bifacial 40% transparency (2000 mm x 1002 mm x 5mm)

GridParity B45/6 275 Wp Glass PV Module bifacial 40% transparency (2000 mm x 1002 mm x 5mm)

from

209,00 €

incl. 0% VAT , plus

An alternative is the Sonnenkraft Glas48 model - available here in our online shop:

https://pvdach.com/Sonnenkraft-245-Wp-Glas48-Doppelglas-rahmenlos-bifacial-2017mmx995mmx7mm

Certification: Grid Parity modules are certified according to EN12600 for overhead installation.

Next delivery arrives on 15.10.2026

Slim module design - ultra-thin - ultra-light

No frame, no backsheet. Two panes of 2mm thermally tempered glass.

Excellent wind / snow load properties

Certified for high wind loads of 2400 Pa and snow loads of 5400 Pa.

Self-cleaning and easy cleaning

The nano-coating bonded to the glass as part of the anti-reflective treatment ensures that dirt particles hardly adhere. Wind and rain then provide self-cleaning. The frameless design prevents dust from accumulating at the edges.

Free from microcracks

The special lamination process of the 2 glass panes guarantees that no microcracks occur during harsh transport, handling and installation conditions or throughout the entire service life of the modules.

Extreme fire resistance

The glass-glass design protects the module from arc and hot spot damage, eliminating potential fire hazards.

Superior low-light performance

The outstanding low-light performance of Almaden modules is guaranteed by anti-reflective nano-coating technology.

Extended warranty

25-year product warranty

Positive power tolerance

0 / +5 W positive tolerance.

PID-free

Freedom from PID (potential-induced degradation) is guaranteed.

-> when installed with our mounting system, the distance from rafter centre to rafter centre is 1020 mm.

Configure

Available immediately

Delivery time: 14 Workdays

optional

Mounting system set for double-glazed modules
+39,00 €
Glass clamping profile for double-glazed modules

complete for module length up to 2105 mm

The offer includes all parts required to install one module, except cover rail, screws + sealing tape.

These must be purchased separately:

Cover rails:
https://pvdach.com/Abdeckschiene-fuer-Montagesystem-Klippsystem-anthrazit-feste-Laengen
(only available in fixed lengths!)

Wood screws:
https://pvdach.com/Schraube-fuer-Holz-Unterkonstruktionen-100-Stck

Metal screws:
https://pvdach.com/Schraube-fuer-Metall-Unterkonstruktionen-100-Stck

Sealing tape:
https://pvdach.com/Abdichtband-5m-extreme-Haftung-20-Jahre

The exact scope of the mounting system is calculated according to the layout of the modules. Please specify your planned layout in the comments field when ordering:

Example: 3 modules in the direction of water flow and 4 modules side by side results in:

- 5 x clamping profiles (we calculate the total length from the length of the modules + a joint of 0.5cm each) incl. support rubber and pull-in rubbers

- 2 x 4m T-rubber (or the actual width of the number of modules + 18mm gap between the modules with our mounting system)

- 2 x Dachdicht (or required quantity)

- required number of filler strips for the edges

- 5 x end brackets

-> if required: flat rubber for support on an eave, please specify when ordering if desired

Note!

Please order one mounting system set for each module and tell us the layout of your modules, e.g. 15 modules = 3 modules in the direction of water flow and 5 modules side by side, then the mounting system will be configured to your requirements.

Please provide the exact dimensions of your modules and the planned layout via the information field during the ordering process so that we can adapt the system to your requirements.

The glass clamping profile can also be ordered to the exact centimetre:

https://pvdach.com/Montagesystem-Meterware - please also order the cover rails if required.
Quantity: 1

optional

Mounting system cover rail in a set
+13,80 €
Cover profile, cover profiles for terminal strips

Clamp cover, cover profile RAL7016 anthracite

Material: Aluminium

Coating: Powder-coated RAL7016 available only in this colour ( anthracite )

Length tolerance: +/- 0.4%

Profile width: 45 mm

serves as a visual finish and as additional protection against water

Your configuration

product/group		price
incl. 0% VAT , plus shipping costs

Description
Others (2)

Electrical specifications (STC)
Maximum power (Pmax): 275 Wp
Optimum operating voltage (Vmp): 27.5 V
Optimum operating current (Imp): 10.0 A
Open-circuit voltage (Voc): 31.6 V
Short-circuit current (Isc): 10.28 A
Maximum system voltage: 1500 V DC (IEC)
Module operating temperature: -40°C to +85°C
Maximum permissible series fuse: 20A
Power tolerance: 0/+5 W

Temperature specifications
Nominal operating cell temperature (NOCT): 45+-2°C
Temperature coefficient of Pmax: -0.40 %/°C
Temperature coefficient of Voc: -0.34 %/°C
Temperature coefficient of Isc: 0.060 %/°C

Mechanical specifications
Solar cell: Bifacial M6, 9BB
Number of cells: 45 (5 x 9)
Dimensions: 2000 x 1002 x 5 mm (without junction box)
Distance from long side to cell edge: 3.5 cm
Distance from short side to cell edge: 7.2 cm
Distance from short side to junction box: 3.0 cm
Weight: 24 kg
Front/back: 2 mm tempered glass
Junction box: IP68 protection class (three bypass diodes)
Output cable: 4.0 mm², symmetrical lengths (approx. 400 mm) or (approx. 2200mm)
Connector: MC4 compatible
Fire safety: Class C

Pack configuration

Quantity per pallet: 33 pieces

► Installation instructions as PDF

This text was translated and optimised with AI.