Mounting system set for laminated safety glass

Glass clamping profile for laminated safety glass

The offer includes all parts required for mounting laminated safety glass, except for cover rail, screws + sealing tape.

These must be purchased separately:

Cover rails:
https://pvdach.com/Abdeckschiene-fuer-Montagesystem-Klippsystem-anthrazit-feste-Laengen
(only available in fixed lengths!)

Wood screws:
https://pvdach.com/Schraube-fuer-Holz-Unterkonstruktionen-100-Stck

Metal screws:
https://pvdach.com/Schraube-fuer-Metall-Unterkonstruktionen-100-Stck

Sealing tape:
https://pvdach.com/Abdichtband-5m-extreme-Haftung-20-Jahre

The exact scope of the mounting system is calculated according to the layout of the modules and the laminated safety glass. Please state your planned layout in the comment field when placing the order:

Example: 3 modules in the direction of water flow and 4 modules side by side results in:

- 5 x clamping profiles (we calculate the total length from the length of the modules + 0,5cm joint each) incl. support rubber and insertion rubbers

- 2 x 4m T-rubber (or actual width of the number of modules + 18mm space between each module with our mounting system)

- 2 x DachDicht (or required quantity)

- required number of filler strips for the edges

- 5 x end brackets

-> if required: flat rubber for support on an eave, please state this when placing the order if desired

Note!

Please order one set of mounting system for each module or laminated safety glass and let us know the layout of your modules, e.g. 15 modules = 3 modules in the direction of water flow and 5 modules side by side, then the mounting system will be configured to suit your requirements.

The glass clamping profile can also be ordered to the exact centimetre:

https://pvdach.com/Montagesystem-Meterware - please also order the cover rails here if required.