Mounting system set for double-glass modules

Mounting system set for double-glass modules

Dieser Artikel wird mit einer Steuerermäßigung (0% Mehrwertsteuer) gemäß §12 Absatz 3 des Umsatzsteuergesetzes angeboten. Für zusätzliche Informationen, bitte hier klicken. klicken.

39,00 €

incl. 0% VAT , plus

Glass clamping profile for double-glass modules

complete for module length up to 2105 mm

The offer includes all parts required for mounting one module, except cover rail, screws + sealing tape.

These must be purchased separately:

Cover rails:
https://pvdach.com/Abdeckschiene-fuer-Montagesystem-Klippsystem-anthrazit-feste-Laengen
(only available in fixed lengths!)

Wood screws:
https://pvdach.com/Schraube-fuer-Holz-Unterkonstruktionen-100-Stck

Metal screws:
https://pvdach.com/Schraube-fuer-Metall-Unterkonstruktionen-100-Stck

Sealing tape:
https://pvdach.com/Abdichtband-5m-extreme-Haftung-20-Jahre

The exact scope of the mounting system is calculated according to the layout of the modules. Please specify your planned layout in the comment field when placing your order:

Example: 3 modules in the direction of water flow and 4 modules side by side results in:

- 5 x clamping profiles (we calculate the total length from the length of the modules + 0.5cm joint each) incl. support rubber and insertion rubbers

- 2 x 4m T-rubber (or actual width of the number of modules + 18mm gap between the modules with our mounting system)

- 2 x DachDicht (or required quantity)

- required number of filling strips for the edges

- 5 x end brackets

-> if required: flat rubber for resting on an eave, please specify upon request when placing the order

Note!

Please order one mounting system set for each module and inform us of the layout of your modules, e.g. 15 modules = 3 modules in the direction of water flow and 5 modules side by side, then the mounting system will be configured to suit your needs.

Please provide us with the exact dimensions of your modules and the planned layout via the info field during the ordering process so that we can adapt the system to your needs.

The glass clamping profile can also be ordered to the exact centimetre:

https://pvdach.com/Montagesystem-Meterware - please also order the cover rails here if required.

Available immediately

Delivery time: 10 Workdays

Description
Others (1)

The mounting system is suitable for glass thicknesses up to 12 mm.

Mounting system for the perfect, rainproof installation of your double-glass modules.

There is an 18 mm gap between the modules. The dimension from rafter centre to rafter centre is determined by the module size + 18 mm.

Example: Glas72 module width: 995mm + 18 mm gap results in 1013 mm from rafter centre to rafter centre. The rafter thickness is irrelevant for this.

The set consists of:

- Glass clamping profile with support rubber and insertion rubbers

- T-rubber sealing profile for unobstructed water drainage at the narrow side of the module

- DachDicht sealing compound

- End bracket

- Filling strip for the edges (sectioned into lengths of 1m each)

- Flat rubber

The set does not include screws or pre-drilled holes!

Link to the screws:

Screws for wooden substructures

Screws for metal substructures

Please tell us your installation plan in the comments during the ordering process, e.g. 8 modules - 2 in the direction of water flow and 4 side by side. We will calculate the exact scope of delivery.

The mounting system is suitable for glass thicknesses up to 12 mm.

Greater glass thicknesses are possible, however, a rainproof installation can then no longer be guaranteed. In addition, in this case the length of the screws used to secure the mounting system must be adjusted accordingly.

Of course, you will receive precise and detailed work instructions with images for the rainproof installation of your modules. Here is the link to the installation video:

https://www.youtube.com/watch?v=8C9oaH04XJs&t=5s

Installation instructions PDF

!ATTENTION!:

Shipping the rails in one piece (without sectioning) is possible at an additional cost.

Please simply specify the desired sectioning when placing the order:

up to 2.2 m --> shipping via UPS 80 € (Austria: 107.10 €)

over 2.2 m up to 6 m --> via freight forwarding 229 € (Austria: only possible up to 4m: 332.01 €)

The shipping costs will be adjusted accordingly after the order has been placed.

If shipping is combined with modules, the additional costs do not apply.

Text was translated and optimized using AI