GridParity B60 330 Wp Glass PV Module bifacial 5% Transparency (1684 mm x 1002 mm x 5 mm)

from
179,00 €
incl. 0% VAT, plus shipping costs
 
!! Attention, for this batch the junction box position is only 6-8mm from the short module edge
 

Certification: Grid Parity modules are certified in accordance with EN12600 f for overhead installation.

 
Slim module design - Ultra-thin - Ultra-light
No frame, no backsheet. Two panes of 2 mm thermally toughened glass.
 
Excellent wind / snow load properties
Certified for high wind loads of 2400 Pa and snow loads of 5400 Pa.
Self-cleaning or easy cleaning
The nano-coating bonded to the glass as part of the anti-reflective treatment ensures that dirt particles hardly adhere. Wind and rain then provide self-cleaning. The frameless design prevents dust from collecting at the edge.
 
Free from microcracks
The special lamination process of the 2 panes of glass guarantees that no microcracks occur during harsh transport, handling and installation conditions or throughout the entire operating life of the modules.
 
Extreme fire resistance
The glass-glass design protects the module against arc and hot spot damage, thereby excluding potential fire hazards.
 
Superior low-light performance
The outstanding low-light performance of Almaden modules is guaranteed by anti-reflective nano-coating technology.
 
Extended warranty
25-year product warranty
 
Positive power tolerance
0 / +5 W positive tolerance.
 
PID-free
Freedom from PID (potential-induced degradation) is guaranteed.
 
 
-> when installed with our mounting system, the distance from rafter centre to rafter centre is 1020 mm.
Configure
Available immediately
Delivery time: 14 Workdays

optional
  • Mounting system set for double-glazed modules
    +39,00 €

     

    Glass clamping profile for double-glazed modules

    • complete for module length up to 2105 mm

    The offer includes all parts required to install one module, except cover rail, screws + sealing tape.

    These must be purchased separately:

    Cover rails:
    https://pvdach.com/Abdeckschiene-fuer-Montagesystem-Klippsystem-anthrazit-feste-Laengen
    (only available in fixed lengths!)

    Wood screws:
    https://pvdach.com/Schraube-fuer-Holz-Unterkonstruktionen-100-Stck

    Metal screws:
    https://pvdach.com/Schraube-fuer-Metall-Unterkonstruktionen-100-Stck

    Sealing tape:
    https://pvdach.com/Abdichtband-5m-extreme-Haftung-20-Jahre


    The exact scope of the mounting system is calculated according to the layout of the modules. Please specify your planned layout in the comments field when ordering:

    Example: 3 modules in the direction of water flow and 4 modules side by side results in:

    - 5 x clamping profiles (we calculate the total length from the length of the modules + a joint of 0.5cm each) incl. support rubber and pull-in rubbers

    - 2 x 4m T-rubber (or the actual width of the number of modules + 18mm gap between the modules with our mounting system)

    - 2 x Dachdicht (or required quantity)

    - required number of filler strips for the edges

    - 5 x end brackets

    -> if required: flat rubber for support on an eave, please specify when ordering if desired


    Note!

    Please order one mounting system set for each module and tell us the layout of your modules, e.g. 15 modules = 3 modules in the direction of water flow and 5 modules side by side, then the mounting system will be configured to your requirements.

    Please provide the exact dimensions of your modules and the planned layout via the information field during the ordering process so that we can adapt the system to your requirements.


    The glass clamping profile can also be ordered to the exact centimetre:

    https://pvdach.com/Montagesystem-Meterware - please also order the cover rails if required.

     

    Quantity: 1

optional
  • Mounting system cover rail set
    +13,80 €

    Cover profile, cover profiles for clamping strips

    Clamp cover, cover profile RAL7016 anthracite

    • Material: Aluminium
    • Coating: Powder-coated RAL7016, only available in this colour (anthracite)
    • Length tolerance: +/- 0.4%
    • Profile width: 45 mm
    • serves as a visual finish and as additional protection against water

Your configuration

product/group price
incl. 0% VAT, plus shipping costs

Montageanleitung für PV-Module

Diese ausführliche Anleitung zur Montage von PV-Modulen zeigt Ihnen Schritt für Schritt jeden Vorgang.

Beschreibung Modul B60, 320Wp


Contact data
Question about item

Please see our privacy notice