Mounting system for 30 mm frame modules, length 3.534 m

This H-rail developed by us turns your modules into a rainproof roof covering. The modules are slid into the H-rails and secured with the supplied end plates. A sealing tape made of weather-resistant cellular rubber is inserted at the narrow joint for sealing. This allows you to quickly and cost-effectively create a rainproof PV roof. The roof pitch must be at least 6° or 10%. ( 1 metre - 10cm height difference? )

We offer these H-rails for modules with 30 mm, 35 mm and 40 mm frames.

Only for the 30 mm modules do we offer rails in the lengths 3.534 m, 5.306 m and 7.078 m.

For the  35 mm and 40 mm modules, the regularly stated rail lengths of 3.50 m, 5.20 m and 7.0 m apply.

Scope of delivery:

H-rail, cellular rubber, end plate, M10x30 screw

Please note that only modules with overhead approval, such as our GridParity B108 modules, provide safety for this application.

Material: aluminium, black anodised, similar to RAL 9004

Note: The shade of the rails may vary slightly . Due to the production process, isolated grey spots may occur on the surface.
Scratches may occur on the anodised surface due to storage and transport. This cannot be prevented, as the anodised layer is relatively thin, and minor imperfections are normal with this type of surface treatment.
 

Please provide us with the exact dimensions of your modules and the planned installation via the info field during the ordering process so that we can adapt the system to your needs.

If the selectable rail lengths do not fit the module sizes you intend to install, the respective rails can be extended by up to 60 cm for an additional charge of € 12.90 per rail. Any extension beyond this is possible for a further additional charge. For this purpose, also provide us with the information on the desired extension in the comment/note field before completing the order.