Solitek** SOLID AGRO B.72, 290 Wp, photovoltaic module, 40% transparency (1733 mm x 1143 mm x 7.2 mm)

from
219,00 €
incl. 0% VAT , plus shipping costs

 

Please note that, due to the sealing, based on our experience, a width of approx. 1143 mm and a length of 1733 mm should be assumed (see also data sheet).

Certification: General building authority approval, AbZ from the German Institute for Building Technology DIBt.

With 40% light transmission, the AGRO solar module offers optimum conditions for use in greenhouses and terrace roofs by maximising natural lighting. It is specially designed to protect plants under extreme conditions such as hail and frost and is characterised by its resistance to ammonia and salt mist. The innovative technology promotes CO2 storage in the soil and supports resource conservation. Cradle to Cradle certified, it offers a sustainable and efficient solution for agriculture with a 30-year product warranty.

-> when installed with our mounting system, the distance from rafter centre to rafter centre is 1162 mm.

Configure
Currently out of stock

optional
  • Mounting system set for double-glazed modules
    +39,00 €

     

    Glass clamping profile for double-glazed modules

    • complete for module length up to 2105 mm

    The offer includes all parts required to install one module, except cover rail, screws + sealing tape.

    These must be purchased separately:

    Cover rails:
    https://pvdach.com/Abdeckschiene-fuer-Montagesystem-Klippsystem-anthrazit-feste-Laengen
    (only available in fixed lengths!)

    Wood screws:
    https://pvdach.com/Schraube-fuer-Holz-Unterkonstruktionen-100-Stck

    Metal screws:
    https://pvdach.com/Schraube-fuer-Metall-Unterkonstruktionen-100-Stck

    Sealing tape:
    https://pvdach.com/Abdichtband-5m-extreme-Haftung-20-Jahre


    The exact scope of the mounting system is calculated according to the layout of the modules. Please specify your planned layout in the comments field when ordering:

    Example: 3 modules in the direction of water flow and 4 modules side by side results in:

    - 5 x clamping profiles (we calculate the total length from the length of the modules + a joint of 0.5cm each) incl. support rubber and pull-in rubbers

    - 2 x 4m T-rubber (or the actual width of the number of modules + 18mm gap between the modules with our mounting system)

    - 2 x Dachdicht (or required quantity)

    - required number of filler strips for the edges

    - 5 x end brackets

    -> if required: flat rubber for support on an eave, please specify when ordering if desired


    Note!

    Please order one mounting system set for each module and tell us the layout of your modules, e.g. 15 modules = 3 modules in the direction of water flow and 5 modules side by side, then the mounting system will be configured to your requirements.

    Please provide the exact dimensions of your modules and the planned layout via the information field during the ordering process so that we can adapt the system to your requirements.


    The glass clamping profile can also be ordered to the exact centimetre:

    https://pvdach.com/Montagesystem-Meterware - please also order the cover rails if required.

     

    Quantity: 1

optional
  • Installation system cover rail set
    +13,80 €

    Cover profile, cover profiles for clamping strips

    Clamp cover, cover profile RAL7016 anthracite

    • Material: Aluminium
    • Coating: Powder-coated RAL7016, only available in this colour (anthracite)
    • Length tolerance: +/- 0.4%
    • Profile width: 45 mm
    • serves as a visual finish and as additional protection against water

Your configuration

product/group price
incl. 0% VAT , plus shipping costs

Contact data

Contact data
Question about item

Please see our privacy notice