GridParity B72/6 450 Wp Glass PV Module bifacial 5% Transparency (2105 mm x 1043 mm x 5 mm)

GridParity B72/6 450 Wp Glass PV Module bifacial 5% Transparency (2105 mm x 1043 mm x 5 mm)

from

223,50 €

incl. 0% VAT , plus

Certification: Grid Parity modules are certified according to EN12600 for overhead installation.

Outstanding performance under wind and snow loads
Certified to withstand high wind loads of 2400 pa and snow loads of 5400 pa.

Slim module design – ultra-thin – ultra-light
Only 2 mm thermally toughened glass is used as front and rear protective material, 12 kg/m2

No microcracks
No microcracks during rough transport

Fire resistance
The double-glass design helps protect the module from damage caused by arcing and hot spots, eliminating potential fire hazards.

Extended warranty

10 year product warranty

PID-free
Guaranteed free from PID (potential-induced degradation)

2 mm toughened solar glass
Only 2 mm thin double-glass pane

Conditionally suitable for overhead installation: due to the size, additional support is required for overhead installation for optical reasons.

Configure

Available immediately

Delivery time: 14 Workdays

optional

Mounting system set for double-glazed modules
+39,00 €
Glass clamping profile for double-glazed modules

complete for module length up to 2105 mm

The offer includes all parts required to install one module, except cover rail, screws + sealing tape.

These must be purchased separately:

Cover rails:
https://pvdach.com/Abdeckschiene-fuer-Montagesystem-Klippsystem-anthrazit-feste-Laengen
(only available in fixed lengths!)

Wood screws:
https://pvdach.com/Schraube-fuer-Holz-Unterkonstruktionen-100-Stck

Metal screws:
https://pvdach.com/Schraube-fuer-Metall-Unterkonstruktionen-100-Stck

Sealing tape:
https://pvdach.com/Abdichtband-5m-extreme-Haftung-20-Jahre

The exact scope of the mounting system is calculated according to the layout of the modules. Please specify your planned layout in the comments field when ordering:

Example: 3 modules in the direction of water flow and 4 modules side by side results in:

- 5 x clamping profiles (we calculate the total length from the length of the modules + a joint of 0.5cm each) incl. support rubber and pull-in rubbers

- 2 x 4m T-rubber (or the actual width of the number of modules + 18mm gap between the modules with our mounting system)

- 2 x Dachdicht (or required quantity)

- required number of filler strips for the edges

- 5 x end brackets

-> if required: flat rubber for support on an eave, please specify when ordering if desired

Note!

Please order one mounting system set for each module and tell us the layout of your modules, e.g. 15 modules = 3 modules in the direction of water flow and 5 modules side by side, then the mounting system will be configured to your requirements.

Please provide the exact dimensions of your modules and the planned layout via the information field during the ordering process so that we can adapt the system to your requirements.

The glass clamping profile can also be ordered to the exact centimetre:

https://pvdach.com/Montagesystem-Meterware - please also order the cover rails if required.
Quantity: 1

optional

Installation system cover rail set
+13,80 €
Cover profile, cover profiles for clamping strips

Clamp cover, cover profile RAL7016 anthracite

Material: Aluminium

Coating: Powder-coated RAL7016, only available in this colour (anthracite)

Length tolerance: +/- 0.4%

Profile width: 45 mm

serves as a visual finish and as additional protection against water

Your configuration

product/group		price
incl. 0% VAT , plus shipping costs

Description
Others (1)

Data:

Electrical specification (STC)
Maximum power at (Pmax): 450 Wp
Optimum operating voltage (Vmp): 44.5 V
Optimum operating current (Imp): 10.11 A
Open-circuit voltage (Voc): 51.0 V
Short-circuit current (Isc): 11.33 A
Module efficiency: 20.4 %
Maximum system voltage: 1500 V DC (IEC)
Operating module temperature: -40 °C to +85 °C
Maximum rated power of the series fuse: 20 A
Power tolerance: 0/+5 W

Temperature specification
Nominal cell operating temperature (NOCT): 45±2°C
Temperature coefficient of Pmax -0.40 %/°C
Temperature coefficient of Voc: -0.34 %/°C
Temperature coefficient of Isc: 0.060 %/°C

Mechanical specification
Solar cell: Bifacial, 9BB
Number of cells: 72 (6 x 12)

Dimensions
Size 2: 2105 × 1043 × 5 mm (without J-Box)

Rafter spacing: 1061 mm
Weight Size 2: 26 kg
Front/rear glass: 2 mm heat-strengthened glass
Junction box: Protection class IP68 (three bypass diodes)
Output cable: 4.0 mm2, symmetrical length (600 mm)
Connections: MC4-compatible
Fire protection class: Class C

Product warranty: 10 years

Pack configuration:

Modules per pallet: 33 pieces

► Installation instructions as PDF

This text was translated and optimised with AI.