• Mounting system for frame modules 40 mm, length 3.50 m
  • Mounting system for frame modules 40 mm, length 3.50 m
  • Mounting system for frame modules 40 mm, length 3.50 m
  • Mounting system for frame modules 40 mm, length 3.50 m
  • Mounting system for frame modules 40 mm, length 3.50 m
  • Mounting system for frame modules 40 mm, length 3.50 m
  • Mounting system for frame modules 40 mm, length 3.50 m
  • Mounting system for frame modules 40 mm, length 3.50 m
  • Mounting system for frame modules 40 mm, length 3.50 m

Mounting system for frame modules 40 mm, length 3.50 m

62,00 €
incl. 0% VAT, plus shipping costs

This H-rail developed by us makes your modules into a rainproof roof covering. The modules are pushed into the H-rails and secured with the supplied end plates. Weather-resistant cellular rubber sealing tape is inserted at the narrow joint for sealing. This allows you to quickly and cost-effectively create a rainproof PV roof,

We stock these H-rails for modules with 30mm, 35mm and 40mm frames.

Please let us know the exact dimensions of your modules so that we can adapt the system to your requirements. Please ensure that only modules with Approval for overhead installation, such as our GridParity B108 modules, provide safety for this application.

Material: Aluminium, black anodised.

 

Note: Storage and transport may result in scratches on the anodised surface. This cannot be prevented, as the anodised layer is relatively thin and minor imperfections are normal with this type of surface treatment.

 

If the selectable rail lengths do not fit the module sizes you are installing, the respective rails can be extended by up to 60 cm for an additional charge of € 12.90 per rail. A further extension is possible for an additional charge. To do so, also provide us with the information on the desired extension in the comment/note field before completing the order.

 

Please let us know the exact dimensions of your modules and the planned installation via the information field during the ordering process so that we can adapt the system to your requirements.

 

  • Frame 
  • Length 
Available immediately
Delivery time: 14 Workdays

When calculating your roof area, please allow for 10 mm spacing between the modules on the narrow side (where the cellular rubber tape is applied).

(The cellular rubber tape has a Thickness of approx. 15 mm and should be compressed to approx. 10 mm during installation.)

 

Of course, you will receive detailed and comprehensive installation instructions with images for the rainproof installation of your modules:
 

 

On the long side, allow for 25 mm between the modules (central web in the profile).

H-rail overhang on the right and left at the edge: 38mm each.

As an example:

Four modules with a width of 1134 mm next to each other result in the following when fully installed:

4 x 1134 mm + 3 x gap 25 mm + 2 x right and left overhang 38mm =

4536 mm + 75 mm + 76 mm = 4687 mm width

This text was translated and optimised with AI.

Item information Value
Category: PV Modules
SKU: 21403

Others also bought:

Stainless steel façade construction screws 6.5 x...
Stainless steel façade construction screws 6.5 x 100mm for H-rail 35 and 40mm framed modules / 100 pieces
74,50 € *
Sonnenkraft 400 Wp HC Alpin TERRACOTTA PV FRAME MODULE... In Stock
Sonnenkraft 400 Wp HC Alpin TERRACOTTA PV FRAME MODULE double glass 2x2mm terracotta frame (1748 mm x 1143 mm x 40 mm)
219,00 € *
Contact data
Question about item

Please see our privacy notice