TommaTech 240 Wp 48PM G2G Terrace Solar Module bifacial 27% Transparency (1500 mm x 980 mm x 7.6 mm)

Glass clamping profile for double-glass modules

• complete for module length up to 2105 mm

The offer includes all parts required for mounting one module, except cover rail, screws + sealing tape.

These must be purchased separately:

Cover rails:
https://pvdach.com/Abdeckschiene-fuer-Montagesystem-Klippsystem-anthrazit-feste-Laengen
(only available in fixed lengths!)

Wood screws:
https://pvdach.com/Schraube-fuer-Holz-Unterkonstruktionen-100-Stck

Metal screws:
https://pvdach.com/Schraube-fuer-Metall-Unterkonstruktionen-100-Stck

Sealing tape:
https://pvdach.com/Abdichtband-5m-extreme-Haftung-20-Jahre

The exact scope of the mounting system is calculated according to the layout of the modules. Please specify your planned layout in the comment field when placing your order:

Example: 3 modules in the direction of water flow and 4 modules side by side results in:

- 5 x clamping profiles (we calculate the total length from the length of the modules + 0.5cm joint each) incl. support rubber and insertion rubbers

- 2 x 4m T-rubber (or actual width of the number of modules + 18mm gap between the modules with our mounting system)

- 2 x DachDicht (or required quantity)

- required number of filling strips for the edges

- 5 x end brackets

-> if required: flat rubber for resting on an eave, please specify upon request when placing the order

Note!

Please order one mounting system set for each module and inform us of the layout of your modules, e.g. 15 modules = 3 modules in the direction of water flow and 5 modules side by side, then the mounting system will be configured to suit your needs.

Please provide us with the exact dimensions of your modules and the planned layout via the info field during the ordering process so that we can adapt the system to your needs.

The glass clamping profile can also be ordered to the exact centimetre:

https://pvdach.com/Montagesystem-Meterware - please also order the cover rails here if required.